+260 211243285

info@finecopglobal.com

ABB ACS150 0.75kW 400V 3ph AC Inverter Drive, DBr, C3 EMC

Awaiting product image

ABB ACS150 0.75kW 400V 3ph AC Inverter Drive, DBr, C3 EMC

Categories: , Brand:

Availability:

In Stock

Compare
Description :

ABB Drives ACS 150 AC Frequency Inverter for 0.75kW (1HP) 400V 3 Ph motor in VxF control to 2.4A. Simple to set-up for speed control of a standard three phase AC Induction motor.

R1 Size – 70mm Wide x 144mm Deep x 201mm high (plus cable clamp plate at 38mm) IP20 case.

Overload – 150% x 60seconds.
Speed Control Range – 0/500Hz.
Braking – To 165 Ohm Minimum, 590 Ohm Maximum external resistor (not supplied) – see the Resistor options linked below or use the ‘Brake Resistor Calculator’ on this page.

Features – Front Mounted Potentiometer, 1 x Analogue Input, 5 Digital Inputs, 1 Relay Contact set.
Programmable from a pc via ‘Flashdrop’.
EMC Filters to EN61800-3 to the 2nd Environment C3 (Industrial).

Input Current – 4.1A, or 2.3A when supplied via a minimum 6.4mH AC Input choke (see the products linked below) to reduce the metered kVA from 2.8kVA per drive, to 1.6kVA.
Input Voltage – 380/480V three phase +-10% at 50/60Hz.

Wall mount in clean environment or cubicle mount.
Rated at 40C Ambient.
Ventilation space above and below – 75mm.
Ventilation space at sides – 0mm.
Heat Loss at max output – 14W.
Mounting onto symmetrical DIN rail or use the screw fixings for side or rear mounting.

Full part number is – ACS150-03E-02A4-4 (68581753)

You May Also like

    Submersible Cables – 50Hz

    0 out of 5

    Tormac cables are used as power supply cables for submersible pump sets. This multi stand, multicore cables are in 3 / 4 core versions with flat or Round type. These cables are suitable for installations in dry, moist & wet environments but however not suitable for explosive areas.

    XRCG4 – Extendable remote controllers

    0 out of 5

    Submersible Flat Cables

    0 out of 5

    Tormac submersible flat cables are designed and producing intelligence for different circumstances in which they have to function. High conductivity annealed and bunched flexible copper conductors are made from electrolytic bright copper twisted together and insulated with colour coded special grade water proof flexible PVC compound. The final production of outer sheath is made from high grade flexible PVC compound imperious to water ,grease, oil etc., thereby it ensure long life and has good with standing capacity to high voltage and current. Tormac 3 core flat cables conform to IS : 694 – 1990.

    Available nominal sizes (in Sq.mm) — 1.0, 1.5, 2.5, 4.0, 6.0, 10.0, & 16.0.
    Packing — 300, 500 and 1000 meters only.

    Note: Don’t use single sheath cables for heavy duty applications like dewatering, swage and slurry pumps in which the acidic fluids and chemicals will damage the sheath. Double sheathed cables can be used for these kinds of applications.
    The company reserves the right to modify the technical specification and illustration without prior notice.

X