Applications
- Chemical Industry
- Oil & Gas
- General Industry
End Suction Chemical Pump (KEC Series)
Quick description:
- Heavy duty bearing ensures long life
- Parts Interchangeability
- Bearing Condition Monitoring
- Various sealing options: Gland Packing, Mechanical Sea, Expellers
- Back Pull-out Designs
- Renewable Wear Parts
- Heavy Duty Shaft Bearing
- Excellent Impeller Adjustment
Availability:
In Stock
Specification
| Power Range | 5 kw – 150kw |
| Nominal Speed | 970/1450/2900 rpm |
| Max. Discharge | 1020 m3/h |
| Head Range | 198 m |
| Max. Solid allowable | 50 mm |
| Max. Operating Pressure | 16 bar |
| Outlet size | 25-200 mm |
| Max. Operating Temperature | 232’C |
You May Also like
A.C. Induction Motor
Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.
Stainless Steel Submersible pumps 8″ (TS/200 – Series-60Hz)
Accordion Sample DescriptionTormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
Centrifugal Monoblock Pumps (TM Series)
Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.
Tiny Sewage & Drainage Pumps (TPS & TSS – SERIES)
Tormac tiny sewage pumps, used in domestic and light commercial applications, Tormac tiny Sewage pumps are come with two variant TPS & TSS come with plastic and stainless stell body with thermoplastic impeler and the carbon ceramic mechanical seal, with special design considerations enabling solids to pass without clogging the pump.