+260 211243285

info@finecopglobal.com

Butterfly, Gate, Globe & Check Valves

Butterfly, Gate, Globe & Check Valves

Category: Brand:

Quick description:

  • Process industries
  • Pipe line systems
  • Construction Industries
  • Pharmaceutical
  • Power plants
  • Petro chemical & fertilizer industries
  • Fluid distribution systems
  • Water treatment plants
  • Refineries
  • Drilling rigs

Availability:

In Stock

Compare

Specification

Type of Valve Centric Disc Butterfly valve with Rubber lined body
Body Type Single Piece, Short wafer or wafer lugged
Seal type Integrally bonded, Replaceable
Size Range DN 50 to DN 600
Pressure Rating PN 10 / PN 16
Operating Temperature
Range		 30°C to 180°C (Depending on MOC)
Seat leakage performance Tight Shut off
Operation Hand lever operation, Worm Gear operation, Electrical / Pneumatic, Actuator operation-optional

 

Type of Valve Bolted Bonnet, OS & Y, Narrow seat type disc
Rating Class 150, Class 300 & Class 600
Face to Face ASME B 16.10
Available Sizes DN 50 to DN 300
Pressure Rating ASME B 16.34 (Standard)
Temperature Rating ASME B 16.34 (Standard Class)
Flange Standard Conformity ASME B 16.5

Applications

  • Process industries
  • Pipe line systems
  • Construction Industries
  • Pharmaceutical
  • Power plants
  • Petro chemical & fertilizer industries
  • Fluid distribution systems
  • Water treatment plants
  • Refineries
  • Drilling rigs

You May Also like

    Air Valve

    0 out of 5

    To release air when the main is being filled and to close and remain closed when the pipe is full to prevent loss of water.

    Available Nominal sizes in mm

    Air valve: 12, 19, 25 & 50.

    Foot Valves

    0 out of 5

    Foot valve is generally placed at the lower end of suction pipe to retain water in the pump casing and suction pipe while pump is at rest consequently, when the pump is again started it does not have to be primed again and pump will deliver water continuously..it has a strainer at bottom portion hence it prevents any foreign particle entering the pump through the suction pipe.

    Available Nominal sizes in mm

    Screw type foot valves: 40, 50, 65, 80, 100, 125, & 150
    Flange type foot valves: 50, 65, 80 & 100.

    Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

    Reflux Valve

    0 out of 5

    Reflux valve is fitted generally in the delivery pipeline to avoid water hammer, upthrust and back spin effects in the pumping system. Reflux valve can also be used anywhere in the suction line of which the bottom end is inserted in to a bore pipe or tube well.

    Available Nominal sizes in mm

    Square type Reflux valves: 40×40, 50×50, 65×65, 80×80, 100×100, 125×125 & 150×150.
    Round type Reflux valves: 50×50, 65×50, 65×5, 80×65, 80×80, 100×80, 100×100.

    Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

    Non Return Valve

    0 out of 5

    Non return valves are fitted generally in the pipeline to prevent backwater pressure and safe guards the entire pumping units.

    Available Nominal sizes in mm

    Round type Non-Return valves: 50×50, 65×65, 80×80, 100×100

    Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.

X