Applications
It is suitable for all centrifugal end suction pumps, non self priming pumps and centrifugal monoblocks pumps.
Foot Valves
Quick description:
Foot valve is generally placed at the lower end of suction pipe to retain water in the pump casing and suction pipe while pump is at rest consequently, when the pump is again started it does not have to be primed again and pump will deliver water continuously..it has a strainer at bottom portion hence it prevents any foreign particle entering the pump through the suction pipe.
Available Nominal sizes in mm
Screw type foot valves: 40, 50, 65, 80, 100, 125, & 150
Flange type foot valves: 50, 65, 80 & 100.
Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.
Availability:
In Stock
Features
- Suction path is almost straight to the pipe and hence friction loss is very less.
- Synthetic rubber flap totally prevents water leakage
- Ruggedly built with graded cast Iron
- Compact design and easy to install
- Metal parts of Foot valves are coated with Epoxy
- Paint to avoid rust formation
- Easily replaceable parts
You May Also like
- Process industries
- Pipe line systems
- Construction Industries
- Pharmaceutical
- Power plants
- Petro chemical & fertilizer industries
- Fluid distribution systems
- Water treatment plants
- Refineries
- Drilling rigs
Non Return Valve
Non return valves are fitted generally in the pipeline to prevent backwater pressure and safe guards the entire pumping units.
Available Nominal sizes in mm
Round type Non-Return valves: 50×50, 65×65, 80×80, 100×100
Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.
Butterfly, Gate, Globe & Check Valves
Air Valve
To release air when the main is being filled and to close and remain closed when the pipe is full to prevent loss of water.
Available Nominal sizes in mm
Air valve: 12, 19, 25 & 50.
Reflux Valve
Reflux valve is fitted generally in the delivery pipeline to avoid water hammer, upthrust and back spin effects in the pumping system. Reflux valve can also be used anywhere in the suction line of which the bottom end is inserted in to a bore pipe or tube well.
Available Nominal sizes in mm
Square type Reflux valves: 40×40, 50×50, 65×65, 80×80, 100×100, 125×125 & 150×150.
Round type Reflux valves: 50×50, 65×50, 65×5, 80×65, 80×80, 100×80, 100×100.
Note: The Company reserves the right to modify the technical specification and the illustration without prior notice.