Applications
Supplying power to all types if indoor and outdoor portable and fixed pumping equipments
Submersible Flat Cables
Quick description:
Tormac submersible flat cables are designed and producing intelligence for different circumstances in which they have to function. High conductivity annealed and bunched flexible copper conductors are made from electrolytic bright copper twisted together and insulated with colour coded special grade water proof flexible PVC compound. The final production of outer sheath is made from high grade flexible PVC compound imperious to water ,grease, oil etc., thereby it ensure long life and has good with standing capacity to high voltage and current. Tormac 3 core flat cables conform to IS : 694 – 1990.
Available nominal sizes (in Sq.mm) — 1.0, 1.5, 2.5, 4.0, 6.0, 10.0, & 16.0.
Packing — 300, 500 and 1000 meters only.
Note: Don’t use single sheath cables for heavy duty applications like dewatering, swage and slurry pumps in which the acidic fluids and chemicals will damage the sheath. Double sheathed cables can be used for these kinds of applications.
The company reserves the right to modify the technical specification and illustration without prior notice.
Availability:
In Stock
Structural Characteristics
- High conductivity annealed and bunched flexible electrolyte bright copper conductors
- High grade PVC insulation and sheath.
- Good with standing capacity to high voltage and current.
Specification
| Voltage rating | 1100 V – AC Supply |
| Temperature range | -10ºC to +70ºC |
| Conductor | High conductivity annealed and bunched copper |
| Insulation material | Flexible water proof PVC |
| Sheath material | Flexible water proof PVC / Rubber |
| Sheath colour | Black |
| Colour | 3 core- Red, Yellow and Blue |
Technical Data
| Conductor Area in sq.mm (Nominal) | No of Strands and Diameter (Nominal). | Thickness of insulation in mm (Nominal). | Thickness of Sheath in mm (Nominal). | Maximum Overall Dimensions in mm | Maximum conductor Resistance at 20ºC Ohms/km | Current carrying capacity at 40ºC Amps | |
| W | H | ||||||
| 1.0″ | 14/0.30 | 0.6 | 0.9 | 10.5 | 5.0 | 18.10 | 12 |
| 1.5″ | 22/0.30 | 0.6 | 0.9 | 11.5 | 5.4 | 12.10 | 16 |
| 2.5″ | 36/0.30 | 0.7 | 1.0 | 14.0 | 6.4 | 7.41 | 22 |
| 4.0″ | 56/0.30 | 0.8 | 1.1 | 16.5 | 7.2 | 4.95 | 29 |
| 6.0″ | 84/0.30 | 0.8 | 1.1 | 18.0 | 8.0 | 3.30 | 37 |
| 10.0″ | 140/0.30 | 1.0 | 1.2 | 22.5 | 9.6 | 1.91 | 51 |
| 16.0″ | 226/0.30 | 1.0 | 1.3 | 26.5 | 11.0 | 1.21 | 68 |
Advantages
- Low conductor resistance
- High Insulation resistance
- Excellent weather resistant
- Flame resistant
- Resistant to oil , chemicals, ozone & solvents
You May Also like
- Robust design
- Excellent resistant to moisture, abrasive and oil
- Flexible in nature
- Special grade PVC sheathing material
- Can with stand any sudden surge current and voltage
- Very Power saving and tough
- Protection against electrical hazards
- Prolongs the life of electrical installations
- Both flat and round cables are available
Submersible Cables (Genvik)
Submersible Cables – 50Hz
Tormac cables are used as power supply cables for submersible pump sets. This multi stand, multicore cables are in 3 / 4 core versions with flat or Round type. These cables are suitable for installations in dry, moist & wet environments but however not suitable for explosive areas.
Submersible Cables – 60Hz
Tormac cables are used as power supply cables for submersible pump sets. This multi stand, multicore cables are in 3 / 4 core versions with flat or Round type. These cables are suitable for installations in dry, moist & wet environments but however not suitable for explosive areas.
