VERTICAL MULTISTAGE PUMPS(TV Series)

VERTICAL MULTISTAGE PUMPS(TV Series)

Quick description:

Tormac TV series Vertical Multistage Pumps are highly reliable and technologically advanced multipurpose pump capable of satisfying the need of a wide variety of users. The in-line design enables the pump to be installed in vertical position and does not interrupt the horizontal pipe line system. All the wet parts like impellers, diffusers, shaft of these pumps are constructed by corrosion resistance AISI stainless steel and designed to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consist operation. These pumps are equipped with replacement mechanical seal.

Availability:

In Stock

Compare

Technical Data

Series	TV
Power range (kW)	0.37 to 45kw (0.5 – 60hp)
Speed in rpm	2900
Power versions	A.C. single phase – 230v – 50Hz permanent split capacitor (psc) Incorporated protector. A.C. three phase 380 – 415 v 50Hz direct online (DOL)
Flow range m3/hr.	1, 2, 3, 4, 5, 8, 16, 32, 44, 66 & 90
Type of duty	S1 (Continuous)
Delivery size in inches	1”x1”, 1¼” x 1¼”, 1½” x 1½”, 2” x 2”, 2½ x 2½”, 3” x 3”, 4” x 4” Available in round/oval/pje
Head range	330m / 1082ft
Rotation	Counter Clock Wise Viewed From Driving End
Degree of protection	IP55 (Optional 44 & 54)
Class of insulation	“B” / “F”
Suction lift	7m / 23ft
Maximum liquid temperature	-15 to 120˚C (5˚F to 248˚F)
Maximum ambient temperature	40˚C / 104˚F

Applications

Apartments
Hotel
Ros
Pressure Boosting Systems
Laboratories
Fire Fighting System
Industries
HVAC

Performance Curves

Vertical Open Well Submersible Pumps (TOV Series)

0 out of 5

Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.

End Suction Centrifugal Pumps (TE Series)

0 out of 5

Tormac End suction pumps with volute casing DIN 16 DIN 2532/2533 single stage end suction with bearing housing, Dimension in accordance with DIN 24255. End suction pumps are single stage centrifugal, non-self-priming, volute pumps. These pumps feature horizontal shaft components with axial suction and impellers and radial discharge ports. Pumps volute chamber and impellers are carefully designed to give the best possible and suction lift characteristics. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw material, dynamically balanced impellers, seal and bearings to ensure long life.

Peripheral Pumps (TSP/TEP Series)

0 out of 5

Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.

CENTRIFUGAL MONOBLOCK PUMPS (TM – Series – Higher Range)

0 out of 5

Tormac Centrifugal pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic and suction lift characteristics. All dimensions and performances are according to EN733- DIN 24255 standards. Most modern and highly sophisticated machinery and technology are employed in the manufacture of these pumps using quality raw material,dynamically balanced impellers, seals and ball bearings to ensure long life. Dynamically balanced rotor ensures vibration and noise free operation. Shaft is made of quality steel, precision ground of ample size for transmitting the rated Horse Power.

VERTICAL MULTISTAGE PUMPS(TV Series)