Centrifugal Monoblock Pumps (TM Series)

Centrifugal Monoblock Pumps (TM Series)

Categories: Centrifugal Monoblock Pumps, Pumps Brand: Tormac

Quick description:

Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.

Availability:

In Stock

Compare

General Information
Applications

General Information

Series	TM
Power Range	0.37 – 2.2 kW – 1Phasr 0.37 – 15.0kW – 3Phase
Speed	2900
Frequency	50Hz
Power Version	A.C Single Phase – 220V, permanent Split capacitor (PSC) incorporated with thermal Over load protector. A.C. Three Phase 380 – 415V, DOL
Degree of Protection	IP – 54
Duty type	S1 Continuous
Head Range	Upto 70m / 230ft
Flow Range	Upto 120m3/h
Impeller	Cast Iron, Bronze, AISI 304/316
Outlet Size in inches	1”x1”, 1¼” x 1” 1½” x 1½”, 2”x1½”, 2”x2”, 2½”x2”, 3”x2½”, 3”x3”, 4”x4”, 4”x3”
Maximum Liquid Temperature	50°C
Class of Insulation	“B” / “F”
Suction Lift	7 m / 23 ft

Applications

Livestock farms
De-watering
Public water supply
Irrigations
Laboratories
Landscape
Irrigation
Pressure boosting System
Fountains and Swimming pool
Industrial and Private water supply
Sprinkler

Vertical Open Well Submersible Pumps (TOV Series)

0 out of 5

Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.

Submersible Motor Eco Series 10″ (D-Series-60Hz)

0 out of 5

Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.

The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

These motors are pre-filled with environmentally safe deionised water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

Submersible Motor Esteem Series 4″ (N-Series-60Hz)

0 out of 5

Tormac Elegant series submersible motors are ingeniously designed and developed employing latest engineering software’s, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.

Tormac Elegant series motors are squirrel cage, Non toxic liquid filled and liquid cooled non rewindable type. The winding of these two pole motors are made of high quality enameled copper wire. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

These motors are pre-filled with environmentally safe edible grade oil which acts as a lubricant. A uniquely designed angular contact ball bearing to with stand high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

A.C. Induction Motor

0 out of 5

Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.

Centrifugal Monoblock Pumps (TM Series)