+260 211243285

info@finecopglobal.com

A.C. Induction Motor

A.C. Induction Motor

Categories: , Brand:

Quick description:

Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.

Availability:

In Stock

Compare

Specification

Class of Motor I E1 I E2 I E3
Type Squirrel Cage Induction Motor Squirrel Cage Induction Motor Squirrel Cage Induction Motor
Power Range 0.37-315 kW, 3Ph, 380-415V, 50Hz 0.75-315kW, 3Ph, 380-415V, 50Hz 0.75-315kW, 3Ph, 380-415V, 50Hz
Pole 2 Pole/4 Pole (6 Pole on request) 2 Pole/4 Pole (6 Pole on request) 2 Pole/4 Pole (6 Pole on request)
Speed 2900 / 1450 rpm 2900 / 1450 rpm 2900 / 1450 rpm
Insulation Class “F” “F” “F”
Protection IP 44 / IP 55 IP 55 IP 55
Duty Continuous (S1) Continuous (S1) Continuous (S1)
Ambient Temp. 40°C 40°C 40°C
Enclosure TEFC TEFC TEFC
Mounting Foot / Face / Flange Foot / Face / Flange Foot / Face / Flange
Direction of Rotation Bi-Directional Bi-Directional Bi-Directional

Materials of Construction

Motor Parts Frame Size Material
Stator frame 56 – 132 Aluminum alloy
160 – 355 Cast iron
Endshield 56 – 90 Aluminum alloy
100 – 355 Cast iron
Flanged endshield 56 – 132 Aluminum alloy
160 – 355 Cast iron
Fan cover 71 – 355 Mild steel
Fan 71 – 355 Industrial nylon grade
Terminal box (3Ph) 71 – 132 Aluminum alloy
160 – 355 Mild steel / Cast iron

Applications

  •  Machine Tools
  • Pharmaceutical Machinery
  • Blowers and Fans
  • Packaging Machinery
  • Air-Conditioners
  • Construction Equipments
  • Compressors
  • Agriculture
  • Material Handling Equipments
  • Food processing Machinery
  • Cranes and Hoist
  • Water treatment plants and
  • Textile Machinery
  • General Engineering
  • Cement Plant

You May Also like

    HORIZONTAL MULTISTAGE PUMPS (TH Series)

    0 out of 5

    Tormac TH Horizontal Multistage Centrifugal pumps are specially designed to facilitate pressure boosting and are best suited for a wide range of applications. The vital components viz. impellers, diffusers, and shaft used in these pumps are made of corrosion resistance high quality Stainless Steel which ensure a smooth and trouble free performance helps to pump safe and hygienic drinking water system. The prime mover of this product is robust in construction and built with thermal overload protection (only in single phase motors). High quality mechanical seals are used to ensure less friction / power loss.

    Centrifugal Monoblock Pumps (TM Series)

    0 out of 5

    Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.

    Water Circulatory Pumps (TWC – SERIES)

    0 out of 5

    “Tormac Water Circulatory pumps are used to circulate hot / cold water with adequate pressure in HVAC systems. All parts & components have been uncompromisingly tested to ensure trouble free performance and safety operation. The motor is of 2 pole asynchronous and squirrel cage type and consists of canned rotor portion. All the rotating parts are in touch with pumped liquid and thus it acts as lubricant to rotor, shaft & thrust bearings. An air vent plug is provided in the rear-end. The centrifugal impeller is of radial & closed type with corrosion resistant curved blades. Impeller, shaft with rotor, thrust bearing pad and the intermediate rings are assembled as a single unit to avoid the misalignment of the bearings. The thrust bearing is designed to withstand high axial thrust load. The particular model of pumps are equipped with a rotary switch in the terminal box that can be used to control the speed in 3 different levels based on the requirement. For trouble free operation the temperature of the pumped liquid should not exceed the specified level, the minimum inlet pressure should be maintained (to avoid cavitations) and dry run must totally be avoided. As the motor is impedance protected and consequently short-circuit proof, no additional motor protection is required. The pump is provided with standard length of cable lead out with plug. These circulatory pumps are generally used in tandem with heating systems. “

    End Suction Paper & Pulp Pump (KEP Series)

    0 out of 5
    • Designed to allow interchangeability of their components
    • Minimizes shaft deflection maximizes bearing and mechanical seal life
    • Heavy duty bearing ensures long life
    • Back pullout design facilitates dismantling the pump without disconnecting the pipes
    • Available both in mechanical seal and soft packed stuffing box design
X