+260 211243285

info@finecopglobal.com

A.C. Induction Motor

A.C. Induction Motor

Categories: , Brand:

Quick description:

Tormac offers a comprehensive range of A.C. Induction motors in standard and premium efficiency designs for wide range of applications. These motors are synchronous type with constant speed suitable for continuous duty operations. Stator is made of low watt loss steel laminations to deliver high efficiency. Dynamically balanced rotor and high quality bearings ensure vibration and noise free operations. The varnish impregnated windings are made of high-grade enameled copper wire. Shaft is made of high quality steel, precision ground of ample size for transmitting the rated horsepower. Construction of motor frames and usage of quality materials result in high performance and low temperature rise, thereby increasing the life cycle of the motor. High-grade cast iron / Die-cast Aluminum components machined with close tolerance and high quality, heavy duty bearings are used to ensure better efficiency and longer life. All three phase motors require adequate control systems with necessary protections. Motors are available with IE1(EFF-2), IE2(EFF-1), IE-3(Premium Efficiency) versions with B3, B5 & B14 mounting dimensions to cater various applications.

Availability:

In Stock

Compare

Specification

Class of Motor I E1 I E2 I E3
Type Squirrel Cage Induction Motor Squirrel Cage Induction Motor Squirrel Cage Induction Motor
Power Range 0.37-315 kW, 3Ph, 380-415V, 50Hz 0.75-315kW, 3Ph, 380-415V, 50Hz 0.75-315kW, 3Ph, 380-415V, 50Hz
Pole 2 Pole/4 Pole (6 Pole on request) 2 Pole/4 Pole (6 Pole on request) 2 Pole/4 Pole (6 Pole on request)
Speed 2900 / 1450 rpm 2900 / 1450 rpm 2900 / 1450 rpm
Insulation Class “F” “F” “F”
Protection IP 44 / IP 55 IP 55 IP 55
Duty Continuous (S1) Continuous (S1) Continuous (S1)
Ambient Temp. 40°C 40°C 40°C
Enclosure TEFC TEFC TEFC
Mounting Foot / Face / Flange Foot / Face / Flange Foot / Face / Flange
Direction of Rotation Bi-Directional Bi-Directional Bi-Directional

Materials of Construction

Motor Parts Frame Size Material
Stator frame 56 – 132 Aluminum alloy
160 – 355 Cast iron
Endshield 56 – 90 Aluminum alloy
100 – 355 Cast iron
Flanged endshield 56 – 132 Aluminum alloy
160 – 355 Cast iron
Fan cover 71 – 355 Mild steel
Fan 71 – 355 Industrial nylon grade
Terminal box (3Ph) 71 – 132 Aluminum alloy
160 – 355 Mild steel / Cast iron

Applications

  •  Machine Tools
  • Pharmaceutical Machinery
  • Blowers and Fans
  • Packaging Machinery
  • Air-Conditioners
  • Construction Equipments
  • Compressors
  • Agriculture
  • Material Handling Equipments
  • Food processing Machinery
  • Cranes and Hoist
  • Water treatment plants and
  • Textile Machinery
  • General Engineering
  • Cement Plant

You May Also like

    Water Circulatory Pumps (TWC – SERIES)

    0 out of 5

    “Tormac Water Circulatory pumps are used to circulate hot / cold water with adequate pressure in HVAC systems. All parts & components have been uncompromisingly tested to ensure trouble free performance and safety operation. The motor is of 2 pole asynchronous and squirrel cage type and consists of canned rotor portion. All the rotating parts are in touch with pumped liquid and thus it acts as lubricant to rotor, shaft & thrust bearings. An air vent plug is provided in the rear-end. The centrifugal impeller is of radial & closed type with corrosion resistant curved blades. Impeller, shaft with rotor, thrust bearing pad and the intermediate rings are assembled as a single unit to avoid the misalignment of the bearings. The thrust bearing is designed to withstand high axial thrust load. The particular model of pumps are equipped with a rotary switch in the terminal box that can be used to control the speed in 3 different levels based on the requirement. For trouble free operation the temperature of the pumped liquid should not exceed the specified level, the minimum inlet pressure should be maintained (to avoid cavitations) and dry run must totally be avoided. As the motor is impedance protected and consequently short-circuit proof, no additional motor protection is required. The pump is provided with standard length of cable lead out with plug. These circulatory pumps are generally used in tandem with heating systems. “

    Tiny Sewage & Drainage Pumps (TPS & TSS – SERIES)

    0 out of 5

    Tormac tiny sewage pumps, used in domestic and light commercial applications, Tormac tiny Sewage pumps are come with two variant TPS & TSS come with plastic and stainless stell body with thermoplastic impeler and the carbon ceramic mechanical seal, with special design considerations enabling solids to pass without clogging the pump.

    VERTICAL MULTISTAGE PUMPS(TV Series)

    0 out of 5

    Tormac TV series Vertical Multistage Pumps are highly reliable and technologically advanced multipurpose pump capable of satisfying the need of a wide variety of users. The in-line design enables the pump to be installed in vertical position and does not interrupt the horizontal pipe line system. All the wet parts like impellers, diffusers, shaft of these pumps are constructed by corrosion resistance AISI stainless steel and designed to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consist operation. These pumps are equipped with replacement mechanical seal.

    Stainless Steel Submersible Pumps 10″ (TS/250 – Series-60Hz)

    0 out of 5

    STAINLESS STEEL SUBMERSIBLE PUMPS 10”, TS / TN – SERIES Tormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation.

    All these submersible pumps are the multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.

X