STAINLESS STEEL SUBMERSIBLE PUMPS 10”, TS / TN – SERIES Tormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation.
All these submersible pumps are the multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble-free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
In Stock
| Pumped Liquids | |
| Non-aggressive, non explosive, pure, cold, Fresh water without abrasive particles having the following characteristics. | |
| pH | 6.5 to 8.5 |
| Turbidity | 50ppm silica scale(max.) |
| Viscosity | 1.75 x 106m²/sec (max.) |
| Hardness (Drinking Water) | 300 (max.) |
| Specific gravity | 1.004 (max.) |
| Allowable solids | 3000 ppm (max) |
| Chlorine ion density | 500 ppm (max.) |
| Permissible amount of sand | 50 g/ m³ (max.) |
| Temperature | 38°C (max.) NBR 90°C VITON |
| Power Range (kW) 1Ph | Power Range (HP) 3Ph | Speed In RPM | Flow Range gpm | Flow Range m³/h | Recommended Head (ft) | Recommended Head (m) | Deliver Size in inches |
| – | 15HP – 300HP | 3450 | 200 – 1400 | 45 – 300 | 25 – 1425 | 8 – 434 | 6 |
| M.O.C | Impeller | Diffuser | Valve Housing | Valve | Cable Guard | Coupling | Suction Interconnector |
| Type S & N | AISI 304 /316 / 904L | AISI 304 /316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 329 | AISI 304 / 316 /904L |
Tormac’s swimming pool pumps are developed with the combination of immense experience, cutting edge technology and integrated quality control system complying with internationally accepted standards. Tormac’s “ TSW” series swimming pool pumps are self-priming type inbuilt with pre filter basket for cleaning the pool water. The mechanical seals are made of graphite and alumina with close tolerance for perfect sealing systems and the dynamically balanced rotary parts ensure vibration and noise free operation. All the parts of both pumps and motors are made of high quality materials to enhance the life span and efficiency. All single phase pumps are equipped with thermal protector to protect the motor from adverse operating conditions.
Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering softwares, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.
The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.
Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.
These motors are pre-filled with environmentally safe deionised water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.
Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.
Tormac TH Horizontal Multistage Centrifugal pumps are specially designed to facilitate pressure boosting and are best suited for a wide range of applications. The vital components viz. impellers, diffusers, and shaft used in these pumps are made of corrosion resistance high quality Stainless Steel which ensure a smooth and trouble free performance helps to pump safe and hygienic drinking water system. The prime mover of this product is robust in construction and built with thermal overload protection (only in single phase motors). High quality mechanical seals are used to ensure less friction / power loss.
