+260 211243285

info@finecopglobal.com

Submersible Motor Eco Series(E- Series) 4″

Submersible Motor Eco Series(E- Series) 4″

Categories: , Brand:

Quick description:

ENCAPSULATED RESIN FILLED

Tormac Esteem series submersible motors are ingeniously designed and developed employing latest engineering software’s, high-tech machinery & tools with the complement of cutting edge  technology for hardwearing and maintenance free operations and to ensure relentless performance.

The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance  systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

Tormac Esteem series motors are non rewindable type. The stator is wound with high quality enameled copper wire and the stator shell is filled diligently with epoxy resin. Allowing faster and greater dissipation the resin ensures longer motor life. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

These motors are pre-filled with environmentally safe deionized water mixed with propylene glycol which acts as a lubricant & coolant. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes.  All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

Availability:

In Stock

Compare

Technical Data

Specifications Nominal Diameter     (4”)
Rated Output & Voltage 0.37kW to 1.1kW – 230V -1Ph, 2 wire 0.37kw to 2.2kW – 230V -1Ph, 3 wire With Thermal protector  (upto 0.75kW) 0.37 to 7.5 kW – 380-415V – 3Ph, DOL
Rated Speed 2900
Voltage Tolerance -15%    +6%
Protection IP 58
Rotation Sequence CCW        – 1Ph CW, CCW –  3Ph
Outer Diameter 98mm
Duty S1 (Continuous)
Linear flow 0.15m/sec
Liquid Temperature 38˚C max
Switching Frequency 20 Times/Hour
Thrust load 0.75 kW to 1.5kW – 3000N / 650 Ibs 2.2 to 7.5 kW – 6500 N / 1500 Ibs
Mounting Dimensions NEMA Standard
Starting Method Permanent Split Capacitor (PSC), Capacitor Start & Capacitor run (CSCR) Direct on Line (DOL)
Motor Lead out type 2 / 3 Wire replaceable leads
Class of Insulation B

Applications

  • Agriculture
  • Mining
  • Industries
  • Residential
  • Fire Fighting and Dewatering
  • Construction & Building Services

You May Also like

    Peripheral Pumps (TSP/TEP Series)

    0 out of 5

    Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.

    Stainless Steel Submersible pumps 8″ (TS/200 – Series-60Hz)

    0 out of 5

    Accordion Sample DescriptionTormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.

    Borehole Submersible Motors 6″ (D-Series-60Hz)

    0 out of 5

    Tormac ECO series submersible motors are ingeniously designed and developed employing latest engineering software’s, high-tech machinery & tools with the complement of cutting edge technology for hardwearing and maintenance free operations and to ensure relentless performance.

    The electrical conditions such as voltage, frequency and the operating conditions are taken into account in designing the winding and cooling system. Tried and trusted indigenously improved design, combined with the most optimized efficiency in electromagnetic design exceptionally ensures trouble free performance. The integrated and most modern quality assurance systems used at every stage of production and flawless workmanship lead to sustained and consistent operation.

    Tormac ECO series motors are squirrel cage, water filled and water cooled rewindable type. The winding of these two pole motors are made of a special water proof wire of pure electrolytic copper insulated with synthetic film or thermoplastic material. The stator shell, housings shell & motor base are made of fabricated S.S 304/316 which prevents the motor from corrosion.

    These motors are pre-filled with environmentally safe deionized water which acts as a lubricant & coolant. The prefilled water level to be ensured at the time of installation. A uniquely designed thrust bearing with high thrust capacity and good quality shaft seals are used to enhance the strength & durability. All single phase motors are supplied with suitable control boxes. The main advantage of rewindable motor construction is making the repair and rewinding easier and hassle free at field levels. All Tormac motors are produced in accordance with ISO 9001 standards and mounting dimensions with NEMA standard.

    Horizontal Open Well Submersible Pumps (TOH Series)

    0 out of 5

    Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.

X