XSeriesG4 Remote Controllers (XRCG4) enable you to monitor, measure, and control your facilities from anywhere, anytime.
| Enclosure Type | Approx. weight (without battery) |
Max I/O Modules | Max battery capacity | |
| RTUs | ||||
| XRCG4 6490 | Small Enclosure | 15 lbs | 3 | 26AH |
| XRCG4 6790 | Medium Enclosure | 29 lbs | 6 | 52AH |
| XRCG4 6890 | Large Enclosure | 45 lbs | 14 | 140AH |
| XRCG4 6990 | Panel Mount | 12 lbs | 6 per board (max. 2 boards) | 26/30AH |
| XRCG4 6895 | X-Large Enclosure | 60 lbs | 22 | Internal battery not supported |
XSeriesG4 Remote Controllers (XRCG4) enable you to monitor, measure, and control your facilities from anywhere, anytime. Combining unmatched measurement technology with next-generation remote control technology, the XRCG4 can significantly extend the life of your equipment while saving you time and money. Featuring spacious cable routing, large enclosures and powerful battery capacity, the XRCG4 is designed to grow with your business. Upgrades are seamless and simple, so there is no need for costly retraining.
The XRCG4 Series is made up of full-featured units without an integrated Multivariable Transducer (XIMV). In its base configuration, each unit is equipped with standard I/O designed to meet the requirements of many low-cost measurement and automation projects. The base I/O includes five analog inputs (0-10 volts DC), four digital outputs and four digital inputs which can be configured as either status inputs or pulse accumulator inputs.
I/O modules can be added to extend the hardware I/O capability. The XRCG4 6895 accommodates up to 22 TFIO modules. All units except the XRCG4 6895 are powered by an internal battery that can be solar charged (or other suitable DC supply) for remote, unattended operation. Several charging options are available. Communications interface cables and equipment can be installed at the factory, ready for quick installation. Checking and modifying configuration and calibration is accomplished with ABB Totalflow’s PCCU32 laptop software, running on a 32-bit Windows® operating system.
Tormac submersible flat cables are designed and producing intelligence for different circumstances in which they have to function. High conductivity annealed and bunched flexible copper conductors are made from electrolytic bright copper twisted together and insulated with colour coded special grade water proof flexible PVC compound. The final production of outer sheath is made from high grade flexible PVC compound imperious to water ,grease, oil etc., thereby it ensure long life and has good with standing capacity to high voltage and current. Tormac 3 core flat cables conform to IS : 694 – 1990.
Available nominal sizes (in Sq.mm) — 1.0, 1.5, 2.5, 4.0, 6.0, 10.0, & 16.0.
Packing — 300, 500 and 1000 meters only.
Note: Don’t use single sheath cables for heavy duty applications like dewatering, swage and slurry pumps in which the acidic fluids and chemicals will damage the sheath. Double sheathed cables can be used for these kinds of applications.
The company reserves the right to modify the technical specification and illustration without prior notice.
Tormac cables are used as power supply cables for submersible pump sets. This multi stand, multicore cables are in 3 / 4 core versions with flat or Round type. These cables are suitable for installations in dry, moist & wet environments but however not suitable for explosive areas.
