Accordion Sample DescriptionTormac stainless steel submersible pumps are ingeniously designed and developed employing latest engineering software’s, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The complete stainless steel construction not only prevents the pumps from corrosion but also exceptionally increases the lifespan. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type, provided with integral check-valve and NEMA standard coupling. These pumps are available with fabricated impellers and diffusers made of AISI 304/316 and the shaft is made of AISI 304/431. The integral check valve prevents backflow and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
In Stock
| Pumped Liquids | |
| Non-aggressive, non explosive, pure, cold, Fresh water without abrasive particles having the following characteristics. | |
| pH | 6.5 to 8.5 |
| Turbidity | 50ppm silica scale(max.) |
| Viscosity | 1.75×10 66m 2 / Sec (max.) |
| Hardness (Drinking Water) | 300 (max.) |
| Specific gravity | 1.004 (max.) |
| Allowable solids | 3000 ppm (max) |
| Chlorine ion density | 500 ppm (max.) |
| Permissible amount of sand | 50 g/ m 3 (max.) |
| Temperature | 38°C (max.) NBR 90°C VITON |
| Power Range (kW) 1Ph | Power Range (HP) 3Ph | Speed In RPM | Flow Range gpm | Flow Range m³/h | Recommended Head (ft) | Recommended Head (m) | Deliver Size in inches |
| – | 7.5HP – 125HP | 3450 | 150 – 600 | 34 – 136 | 20 – 1320 | 6 – 402 | 5 |
| M.O.C | Impeller | Diffuser | Valve Housing | Valve | Cable Guard | Coupling | Suction Interconnector |
| Type S & N | AISI 304 /316 / 904L | AISI 304 /316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 304 / 316 / 904L | AISI 329 | AISI 304 / 316 /904L |
Tormac single stage centrifugal pumps are providing with axial suction port and radial discharge port. The pump has back pull-out design. State of the art machinery, most advanced pumping technology and expertise gained over the years and employed in the, manufacture of these pumps. Quality raw material, seals, ball bearings and dynamically balanced rotating components are used to ensure long life.
Tormac centrifugal openwell pump’s volute chamber and impellers are carefully designed to give the best possible hydraulic efficiency and suction lift characteristic. State of the art machinery, technology and expertise gained over the years are employed in the manufacture of these pumps using quality raw material, journal bushes and dynamically balanced rotating components to ensure long life. Tormac openwell submersible prime movers are squirrel cage water filled and water-cooled rewindable type made of a special waterproof pure electrolytic copper insulated with synthetic film material. A uniquely designed thrust bearings with high thrust capacity and good quality shaft seals are used to enhance the strength and durability. All single-phase motors are incorporated with thermal overload protector. All Tormac openwell submersible pumps are produced in accordance with ISO 9001 standards.
Tormac cast iron submersible pumps are ingeniously designed and developed employing latest engineering softwares, high-tech machinery, tools and cutting edge of pumping technology to deliver the best possible hydraulic efficiency. The integrated and most modern quality assurance systems used at every stage of the production and flawless workmanship ensure sustained and consistent operation. All these submersible pumps are multistage single suction centrifugal type and provided with integral check-valve and NEMA standard coupling. These pumps are available with impellers made of bronze, diffusers made up of cast iron and the shaft is made of AISI 410/431. The integral check valve prevents back flow, up thrust and reduces the risk of water hammer which paves the way for trouble free performance. The suction screen is designed with utmost care so as not to reduce the inflow of water and at the same time to prevent damage to the pump and clogging due to the entry of sand and other foreign particles.
